-40%

NEW rugged dual frequency GNSS gps RTK Hi-target V60 Base and mobile station

$ 4118.39

Availability: 18 in stock
  • MPN: Does Not Apply
  • Return shipping will be paid by: Buyer
  • Model: V60
  • Condition: New
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Country/Region of Manufacture: China
  • Brand: Hi-target

    Description

    V60 GNSS RTK SYSTEM
    The V60 is a more compact-design and higher-performance GNSS RTK system, besides its rugged design to resist impact and vibration. The V60 has industrial OLED display screen on its front control panel to show all information and status of the work. With the smart speaker inside the receiver, the DIY guiding voice can be customized in any language, even dialect! 1GB internal storage plus 8GB Micro SD card memory is standard, the V60 supports up to 32GB extension of memory. The V60 is fully compatible with other GNSS RTK receivers from the world market. The static data can be saved directly in RINEX format.
    MEASUREMENTS
    • 220 Channels
    • Advanced Pacific Crest Maxwell 6 Custom Survey GNSS Technology
    • High precision multiple correlator for GNSS pseudo range measurements
    • Unfiltered, unsmoothed pseudo range measurements data for low noise, low multipath error, low time domain correlation and high dynamic response
    • Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth
    • Signal-to-Noise ratios reported in dB-Hz
    • Proven Pacific Crest low elevation tracking technology
    Satellite signals tracked simultaneously
    GPS: Simultaneous L1C/A, L2C, L2E, L5
    GLONASS: Simultaneous L1C/A, L1P, L2C/A (GLONASS M only), L2P
    SBAS: Simultaneous L1 C/A, L5
    Galileo: Simultaneous L1 BOC, E5A, E5B, E5AltBOC
    BDS/Compass: B1, B2
    QZSS: L1 C/A, L1 SAIF, L2C, L5
    POSITIONING PERFORMANCE
    Static and Fast Static GNSS surveying
    Horizontal: 2.5mm+0.5ppm RMS
    Vertical: 5mm+0.5ppm RMS
    Post Processing Kinematic
    (PPK / Stop & Go) GNSS surveying
    Horizontal: 1cm+1ppm RMS
    Vertical: 2.5cm+1ppm RMS
    Initialization time: typically 10 minutes for base while 5 minutes for rover
    Initialization reliability: typically > 99.9%
    Real
    time Kinematic
    (RTK) surveying
    Horizontal: 8mm+1ppm RMS
    Vertical: 15mm+1ppm RMS
    Initialization time: typically < 8 seconds
    Initialization reliability: typically > 99.9%
    Code Differential GNSS positioning
    Horizontal: 25cm+1ppm RMS
    Vertical: 50cm+1ppm RMS
    SBAS: 0.50m Horizontal, 0.85m Vertical
    HARDWARE
    Physical
    Dimensions (W x H): 1
    8
    .
    2
    0cm x
    9
    .
    8
    0cm (7.17 in x 3.86 in)
    Weight: 1.
    25
    kg (2.
    76
    lb) with
    out
    internal battery
    Operating temperature: -45

    to +65

    (-49

    to +149

    )
    Storage temperature: -55

    to +85

    (-67

    to +185

    )
    Humidity: 100%, considering
    Water/dustproof: IP67 dustproof, protected from temporary immersion to depth of 1m (3.28ft).
    Shock and Vibration: Designed to survive a 3m
    (9.84ft) natural fall onto concrete.
    Electrical
    Power 6V to 28V DC external power input
    Power consumption

    3.5W
    Automatic Switching between internal power and external power
    Rechargeable, removable 7.4V, 5000mAh Lithium-Ion battery in internal battery compartment
    Internal battery life
    Static 13 - 15 hours
    RTK Rover (UHF/GPRS/3G) 10 - 12 hours
    RTK Base 8 - 10 hours
    I/O interface
    1 x Bluetooth
    1 x standard USB2.0 port
    1 x TNC UHF connector
    2 x RS232 serial port
    2 x DC power input (8-pin & 5-pin)
    1 x Micro SD card
    p
    ort
    COMMUNICATION AND DATA STORAGE
    3G
    Communication
    Fully integrated, fully sealed internal 3G
    , compatible with GPRS
    Network RTK (via CORS) range
    20-50km
    HI-TARGET internal UHF radio (standard)
    Frequency: 4
    5
    0
    ~470
    MHz with 116 channels
    Transmitting Power: 1W,
    2
    W,
    5
    W adjustable
    Transmitting Speed:
    9.6Kbps,
    19.2Kbps
    Working Range: 5
    k
    m typical, 8~10km optimal
    Pacific Crest
    internal UHF radio
    Frequency:
    403
    ~47
    3
    MHz
    Transmitting Power: 0.5W,
    2
    W adjustable
    Transmitting Speed: Up to 19.2Kbps
    Support most of radio communication protocol
    Working Range: 3~5km typical, 8~10km optimal
    HI-TARGET External UHF radio (standard)
    Frequency: 460 MHz with 116 channels
    Transmitting Power: 5W, 10W, 20W, 30W adjustable
    Transmitting Speed: Up to 19.2Kbps
    Working Range: 8~10
    k
    m typical, 15~20km optimal
    Pacific Crest ADL Vantage Pro External UHF radio
    Frequency: 390~430 MHz or 430~470 MHz
    Transmitting Power: 4W to 35W adjustable
    Transmitting Speed: Up to 19.2Kbps
    Support most of radio communication protocol
    Working Range: 8~10
    k
    m typical, 15~20km optimal
    Support other external communication device
    For example, external GSM modem.
    Data storage
    1GB Internal storage+ 8GB Internal
    Micro
    SD Card memory (Support up to 32GB extension)
    Record GNS and Rinex format
    simultaneously
    Data formats
    (1Hz positioning output, up to 50 Hz - depends on installed option)
    CMR: sCMRx, CMR, CMR+ input and output
    RTCM: RTCM 2.1, 2.2, 2.3, 3.0, 3.1, 3.2 input and output
    Navigation outputs ASCII: NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS
    Navigation outputs Binary: GSOF
    1 Pulse Per Second Output